Pont de Normandie
Pont de Normandie | |
|---|---|
 | |
| Coordinates | 49°26′09″N 0°16′28″E / 49.43583°N 0.27444°E |
| Carries | A29 autoroute |
| Crosses | Seine |
| Locale | Le Havre–Honfleur, France |
| Maintained by | Société des Autoroutes de Paris Normandie |
| Characteristics | |
| Design | Cable-stayed bridge M. Virlogeux, F. Doyelle, C. Lavigne |
| Total length | 2,143.21 metres (7,032 ft) |
| Width | 23.6 metres (77 ft) |
| Height | 214.77 metres (705 ft) |
| Longest span | 856 metres (2,808 ft) |
| Clearance below | 52 metres (171 ft) |
| History | |
| Constructed by | Bouygues Campenon Bernard Dumez Monberg & Thorsen Quillery Sogea Spie Batignolles |
| Opened | 1995 |
| Location | |
 | |
The Pont de Normandie (English: Normandy Bridge) is a cable-stayed road bridge that spans the river Seine linking Le Havre to Honfleur in Normandy, northern France. Its total length is 2,143.21 metres (7,032 ft) – 856 metres (2,808 ft) between the two piers. It is also the last bridge to cross the Seine before it empties into the ocean. It is a motorway toll bridge with a footpath and a narrow cycle lane in each direction allowing pedestrians and cyclists to cross the bridge free of charge, while motorcycling is also toll-free.[1]
Construction
[edit]The bridge was designed by Michel Virlogeux, the general studies having been led by Bernard Raspaud from Bouygues. The works management was shared between G. Barlet and P. Jacquet. The architects were François Doyelle and Charles Lavigne.[2] Construction by Bouygues, Campenon Bernard, Dumez, Monberg & Thorsen, Quillery, Sogea and Spie Batignolles[2] began in 1988 and lasted seven years. The bridge opened on 20 January 1995.
At the time it was both the longest cable-stayed bridge in the world, and also had a record distance between piers for a cable-stayed bridge. It was more than 250 metres (820 ft) longer between piers than the previous record-holder. This record was lost in 1999 to the Tatara Bridge in Japan. Its record for length for a cable-stayed bridge was lost in 2004 to the 2883 meters of the Rio-Antirrio. The total cost of the bridge, ancillary structures and financing was $465 million. The bridge proper cost €233 million (US$250 million).[3][4]
The cable-stayed design was chosen because it was both cheaper and more resistant to high winds than a suspension bridge. Shortly after opening, the longest cables exhibited excessive vibrations, so several damping systems were quickly retrofitted.
Structure
[edit]The span, 23.6 metres (77 ft) wide, is divided into four lanes for vehicular traffic and two lanes for pedestrians. The pylons, made of concrete, are shaped as upside-down Ys. They weigh more than 20,000 t (20,000 long tons; 22,000 short tons) and are 214.77 metres (705 ft) tall. More than 19,000 t (19,000 long tons; 21,000 short tons) of steel and 184 cables made by fr:Freyssinet were used.
Gallery
[edit]
-
From above -
From the N1029 (A29 Autoroute) -
Bridge in 2006
.jpg)
See also
[edit]- List of bridges in France
- List of crossings of the River Seine
- List of longest cable-stayed bridge spans
- List of tallest bridges in the world
References
[edit]- ^ Les tarifs, retrieved 6 August 2022
- ^ a b Normandy Bridge at Structurae. Retrieved 30 September 2006.
- ^ The Normandy bridge: The bridge in figures (PDF), retrieved 10 August 2014
- ^ "Construction Facts - The Sourcebook of Statistics, Records and Resources" (PDF), Engineering News Record, vol. 251, Number 20a, McGraw Hill, November 2003, retrieved 9 August 2014
External links
[edit]
- Website of Pont de Normandie and Pont de Tancarville (in French)
- Website of the company operating the bridge (in French)
| International | |
|---|---|
| National | |
| Geographic | |
